Lacons® 120300-BAS Blue Static Dissipative (ESD) Plastic Container

Lacons® 120300-BAS Blue Static Dissipative (ESD) Plastic Container 1,000/Box

Price per Box:$410.000

Price per piece:$410.000

Total Price:$410.000

Outside
1.19"Dia. X 0.29"Ht.
Inside
1.06" Dia. X 0.21" Ht.

Part Number: 120300-BAS-1,000/Box

Box Quantity: 1000

The item you are trying to purchase is currently out of stock.
Please enter your name, email, and phone number below.
We will contact you as soon as this product is available.

Name: *

Email: *

Phone: *

Verification: *

Type the word above...

Quantity	Price
1000 - 2999	$0.410
3000 - 4999	$0.333
5000 - 9999	$0.293
10000 - 24999	$0.268
25000 - 49999	$0.230
50000+	$0.193

Product Description
Product Features
Measurements
Technical Info.

Lacons® plastic containers are manufactured in the USA with permanent ESD Static Dissipative material that has a surface resistivity of 1 x 10⁸ to 9.9 x 10⁹ ohms per square, with a static decay rate of 5kV to 50V, in less than .50 seconds.

With no, or a very low, initial charge, Blue Static Dissipative ESD containers are ideal for use with sensitive electronic components, conductors or any items sensitive to electrostatic discharges. In contrast to CAS material which ‘conducts’ any charges with which it makes contact, BAS material ‘dissipates’ static build up in a relatively slower and more controlled way, preventing discharges to or from human contact with the product.

Static Dissipative ESD containers allow for the ultimate protection of your static sensitive integrated circuits, electronic assemblies, or medical devices. As a permanent anti-static material the Lacons® 120300-BAS Static Dissipative container is suitable as electrostatic discharge (ESD) packaging for long term storage or for short term static protection during the transport and shipping processes.

Lacons containers in smaller quantities.
esdplasticcontainers.com now has a huge selection of lacons containers with no minimums.

Request a Sample!

**Properties and Average Values of BAS Polypropylene**
ELECTRICAL	SI Metric	ASTM Test
Volume Resistivity	1E7 - 9.9E8 ohm.cm	D 257
Surface Resistivity	1E8 - 9.9E9 ohm/sq	D257
Surface Resistance	1E7 - 9.9E8 ohm	ESD STM11.11
Static Decay - MIL-PRF-81705D, 5kV to 50V, 12% RH	< 0.50s	FTMS101C / 4046.1

**Regulatory Compliance Information for BAS Polypropylene**
Allergens
The material used to manufacture this product does not contain any allergens - defined by the FDA as Milk, Eggs, Fish, Crustaceans, Wheat, Soy, Peanuts, or Tree nuts.
Animal Derived Content
There are no known sources of Animal Derived Content in the raw materials used to manufacture this product.
Bisphenol A
This product does not contain any 4,4'-Bisphenol A (BPA), CAS # 80-05-7.
CONEG/Heavy Metals
This product meets the CONEG limitation of 100ppm for the total incidental context of cadmium, chromium, lead, or mercury. The quantity of these heavy metals is below the limits given in Annex II (Note) of the Decision 2002/525/EC of June 27th
Epoxy Derivatives
The material used to manufacture this product does not contain 2,2-bis(4-hydroxyphenyl)propane bis (2,3-epoxypropyl) ether (BADGE), bis(hydroxyphenyl)methane bis(2,3-epoxypropyl) ethers (BFDGE) or novolac glycidyl ethers (NOGE).
European Directive 2003/11/EC
This product conforms to the European Directive 2003/11/EC of February 2003 amending 76/769/EEC of 27 July 1076. No Polychlorinated Biphenyls (PCB), Polychlorinated Terphenyls (PCT), Octobromo-diphenyl ethers (OctaBDE), or Decabromo-diphenyl ethers (Deca-BDE) was used in the manufacturing of this product
Latex
This product does not contain any Latex. There are no known sources of Latex in the raw materials used to manufacture this product.
Ozone Depleting Chemicals (ODC's)
No Class I or Class II ODC's listed in Resolution 1005/2009/EX were used in the manufacture or formation of this product.
Phthalates
This product does not include the intentional addition of any phthalate plasticizers, including Benzyl Butyl Phthalate (BBP), CAS #85-68-7, Dibutyl Phthalate (DBP), CAS #84-74-2, or Di(2-ethylhexyl) Phthalate (DEHP), CAS #117-81-8. However, the manufacturer of the polypropylene resin used in this product reports that levels of up to 5 ppm phthalates may occur as residuals from the catalyst system used to manufacture this polymer.
Revised RoHS Directive 2011/65/EU
The chemical composition of the polypropylene material used in the manufacturing of this product is compliant with the Revised RoHS Directive, 2011/65/EU. This material contains less than 0.1% of lead (Pb) or lead compounds, mercury (Hg) or mercury compounds, hexacalent chromium compounds (Cr⁺⁶), and polybrominated biphenyl (PBB) flame retardants or polybrominated diphenyl ether (PBDE) flame retardants; and additionally contains less than 0.01% cadmium (Cd) or cadmium compounds.
REACH SVHC
This product does not contain any of the 163 chemicals held to be Substances of Very High Concern (SVHC's) as defined by the European REACH Program. Incidental amounts of any of these chemicals occuring as impurities, if present, would be below the 0.1% threshold.
SHELF LIFE
While the shelf life of products manufactured with thermoplastic composites is considered to be indefinite if stored in stable environments, the shelf-life of our products can be extended by storing the products at room temperature, out of sunlight, and in a dry environment. If you have any shelf-life or storage related questions, please contact us.

**Chemical and Environmental Resistance of Polypropylene**
Weak Acids
E - Excellent G - Good F - Fair P - Poor
E
Strong Acids
G
Weak Alkalis
E
Strong Alkalis
E
Organic Solvants
P
Alcohols
G
Hydro Carbons
F
Fuels
F
Gamma Rad.
P
UV Rad.
F

Lacons® 120300 Plastic Sample Container 1/20 oz.

Lacons® 120300 Round Hinged-Lid Plastic Container 7,000/Box

$819.000

Select Options

Lacons® 120300-ASP Pink Anti-Static Plastic Container

Lacons® 120300-ASP Anti-Static Pink (ESD) Plastic Container 1,000/Box

$205.000

Buy

Lacons® 120450 Round Hinged-Lid Plastic Container 1,000/Box

$173.000

Select Options

12HF Hard White Round Foam Inserts For Lacons

12HF - White Hard Foam - 1" Foam Inserts for Lacons® 1.25 inch Containers 1000/Box

$104.000

Buy

12SF Soft Grey Round Foam Inserts For Lacons

12SF Grey Soft Foam Inserts For 1.25 Inch Lacons® Containers 1000/Box

$67.000

Buy

Blank Labels for 1.25" Lacons® Plastic Containers L-100 (1000 pc Roll)

$29.000

Buy

Blank Labels for 1.25" Lacons® Plastic Containers LS-100 (16 sheets, 63/Sheet)

$16.752

Buy

Lacons SHRB-12 Tamper Evident Heat Shrink Bands

SHRB-12 Tamper Evident Shrink Bands 1000/Box

$28.000

Buy

Lacons® 120300-BAS Blue Static Dissipative (ESD) Plastic Container 1,000/Box

Price

Quantity Pricing

Customers Also Viewed

Recommended Accessories

Browse Similar Items