Lacons® 250675 Round Hinged-Lid Plastic CAS Container

Lacons® 250675-CAS Conductive Anti Static (ESD) Plastic Container 900/Box

Price per Box:$865.800

Price per piece:$865.800

Total Price:$865.800

Outside
2.51"Dia. X 0.65"Ht.
Inside
2.31" Dia. X 0.53" Ht.

Part Number: 250675-CAS-900/Box

Box Quantity: 900

The item you are trying to purchase is currently out of stock.
Please enter your name, email, and phone number below.
We will contact you as soon as this product is available.

Name: *

Email: *

Phone: *

Verification: *

Type the word above...

Quantity	Price
900 - 2999	$0.962
3000 - 4999	$0.764
5000 - 9999	$0.744
10000 - 24999	$0.708
25000 - 49999	$0.686
50000+	$0.664

Product Description
Product Features
Measurements
Technical Info.

Lacons® series plastic containers are manufactured in the USA with permanent ESD Conductive Anti-Stat (CAS) material that has a surface resistivity of less than 1 x 10⁶ ohms per square, with a static decay rate of 5kV to 50V, in less than 2 seconds. These round hinged lid plastic containers are a must have for your static sensitive products.

With no initial charge, Conductive Anti-Static (CAS) containers are ideal for use storing items sensitive to electric charges, such as flammable or explosive materials. In contrast to other ESD materials such as BAS which ‘dissipates’ static build up slowly, CAS material ‘conducts’ any charges with which it makes contact.

As a permanent anti-static material, the 250675-CAS Conductive Anti-Stat container is suitable as electrostatic discharge (ESD) packaging for long term storage or for short term static protection during the transport or shipping processes. This REACH and RoHS Compliant ESD container can be used in medical industries, pyrotechnic industries, or for any use case that requires improved heat transfer and the conductance of charges which make contact with the container.

Lacons CAS containers in smaller quantities.
esdplasticcontainers.com now has a huge selection of lacons CAS containers with no minimums.

Request a Sample!

**Properties and Average Values of CAS Polypropylene**
ELECTRICAL	SI Metric	ASTM Test
Volume Resistivity	< 1E3 ohm.cm	D 257
Surface Resistivity	< 1E6 ohm/sq	D 257 / ESD STM11.11
Surface Resistance	< 1E5 ohm	ESD STM11.11
Static Decay - MIL-PRF-81705D, 5kV to 50V, 12% RH	< 2.00s	FTMS101C / 4046.1

**Regulatory Compliance Information for CAS Polypropylene**
Allergens
The material used to manufacture this product does not contain any allergens - defined by the FDA as Milk, Eggs, Fish, Crustaceans, Wheat, Soy, Peanuts, or Tree nuts.
Animal Derived Content
There are no known sources of Animal Derived Content in the raw materials used to manufacture this product.
Bisphenol A
This product does ot contain any 4,4'-Bisphenol A (BPA), CAS # 80-05-7.
CONEG/Heavy Metals
This product meets the CONEG limitation of 100ppm for the total incidental context of cadmium, chromium, lead, or mercury. The quantity of these heavy metals is below the limits given in Annex II (Note) of the Decision 2002/525/EC of June 27th
Epoxy Derivatives
The material used to manufacture this product does not contain 2,2-bis(4-hydroxyphenyl)propane bis (2,3-epoxypropyl) ether (BADGE), bis(hydroxyphenyl)methane bis(2,3-epoxypropyl) ethers (BFDGE) or novolac glycidyl ethers (NOGE).
European Directive 2003/11/EC
This product conforms to the European Directive 2003/11/EC of February 2003 amending 76/769/EEC of 27 July 1076. No Polychlorinated Biphenyls (PCB), Polychlorinated Terphenyls (PCT), Octobromo-diphenyl ethers (OctaBDE), or Decabromo-diphenyl ethers (Deca-BDE) was used in the manufacturing of this product
Latex
There are no known sources of Latex in the raw materials used to manufacture this product.
Ozone Depleting Chemicals (ODC's)
No Class I or Class II ODC's listed in Resolution 1005/2009/EX were used in the manufacture or formation of this product.
Phthalates
This product does not include the intentional addition of any phthalate plasticizers, including Benzyl Butyl Phthalate (BBP), CAS #85-68-7, Dibutyl Phthalate (DBP), CAS #84-74-2, or Di(2-ethylhexyl) Phthalate (DEHP), CAS #117-81-8. However, the manufacturer of the polypropylene resin used in this product reports that levels of up to 5 ppm phthalates may occur as residuals from the catalyst system used to manufacture this polymer.
Revised RoHS Directive 2011/65/EU
The chemical composition of the polypropylene material used in the manufacturing of this product is compliant with the Revised RoHS Directive, 2011/65/EU. This material contains less than 0.1% of lead (Pb) or lead compounds, mercury (Hg) or mercury compounds, hexacalent chromium compounds (Cr⁺⁶), and polybrominated biphenyl (PBB) flame retardants or polybrominated diphenyl ether (PBDE) flame retardants; and additionally contains less than 0.01% cadmium (Cd) or cadmium compounds.
REACH SVHC
This product does not contain any of the 163 chemicals held to be Substances of Very High Concern (SVHC's) as defined by the European REACH Program. Incidental amounts of any of these chemicals occuring as impurities, if present, would be below the 0.1% threshold.
SHELF LIFE
While the shelf life of products manufactured with thermoplastic composites is considered to be indefinite if stored in stable environments, the shelf-life of our products can be extended by storing the products at room temperature, out of sunlight, and in a dry environment. If you have any shelf-life or storage related questions, please contact us.

**Chemical and Environmental Resistance of Polypropylene**
Weak Acids
E - Excellent G - Good F - Fair P - Poor
E
Strong Acids
G
Weak Alkalis
E
Strong Alkalis
E
Organic Solvants
P
Alcohols
G
Hydro Carbons
F
Fuels
F
Gamma Rad.
P
UV Rad.
F

Lacons® 250675 Round Hinged-Lid Plastic Container 900/Box

$432.900

Select Options

Lacons® 250675-CAS Conductive Anti Static (ESD) Plastic Container 900/Box

Price

Quantity Pricing

Customers Also Viewed

Browse Similar Items