Statcons 4012-CAS Two Piece Black ESD Conductive Plastic Containers

Statcons SC4012-CAS Two Piece Black ESD Conductive Plastic Container 50/Box

Price per Box:$314.350

Price per piece:$314.350

Total Price:$314.350

Outside
3.5"Dia. X 1.0"Ht.
Inside
3.38" Dia. X 0.85" Ht.

Part Number: SC4012-CAS-50/Box

Box Quantity: 50

The item you are trying to purchase is currently out of stock.
Please enter your name, email, and phone number below.
We will contact you as soon as this product is available.

Name: *

Email: *

Phone: *

Verification: *

Type the word above...

Quantity	Price
50 - 399	$6.287
400+	$4.770

Product Description
Product Features
Measurements
Technical Info.

Statcons™ series plastic vials are manufactured in the USA with permanent ESD Conductive Anti-Stat (CAS) material that has a surface resistivity of less than 1 x 10⁶ ohms per square, with a static decay rate of 5kV to 50V, in less than 2 seconds.

With no initial charge, Conductive Anti-Static (CAS) containers are ideal for use storing items sensitive to electric charges, such as flammable or explosive materials. In contrast to other ESD materials such as BAS which ‘dissipates’ static build up slowly, CAS material ‘conducts’ any charges with which it makes contact.

As a permanent anti-static material, the 4012-CAS Conductive Anti-Stat container is suitable as electrostatic discharge (ESD) packaging for long term storage or for short term static protection during the transport or shipping processes. This REACH and RoHS Compliant ESD container can be used in medical industries, pyrotechnic industries, or for any use case that requires improved heat transfer and the conductance of charges which make contact with the container.

Try our ESD Container Store if you need to order smaller quantities!

**Properties and Average Values of CAS Polypropylene**
PERMANENCE	Imperial	SI Metric	ASTM Test
Specific Gravity	1.00	1.00	D 792
Melt Flow Rate (@ 230*C/2.16 kg)	6.00g/10 min	6.00g/10 min	D 1238
Molding Shrinkage (1/8 in (3.2mm) section)	0.0120 - 0.0170 in/in	1.20 - 1.70 %	D 955
MECHANICAL	Imperial	SI Metric	ASTM Test
Impact Strength, Izod - notched 3.2mm section - unnotched 3.2mm section	8.0 ft-lbs/in No Break	427 J/m No Break	D 256 D 4812
Tensile Strength	3400 psi	23 MPa	D 638
Tensile Elongation	5.0 - 10.0 %	5.0 - 10.0 %	D 638
Tensile Modulus	0.20 x 10^6 psi	1379 MPa	D 638
Flexural Strength	5000 psi	34 MPa	D 790
Flexural Modulus	0.19 x 10^6 psi	1310 MPa	D 790
ELECTRICAL	Imperial	SI Metric	ASTM Test
Volume Resistivity	< 1E3 ohm.cm	< 1E3 ohm.cm	D 257
Surface Resistivity	< 1E6 ohm/sq	< 1E6 ohm/sq	D 257 / ESD STM11.11
Surface Resistance	< 1E5 ohm	< 1E5 ohm	ESD STM11.11
Static Decay - MIL-PRF-81705D, 5kV to 50V, 12% RH	< 2.00s	< 2.00s	FTMS101C / 4046.1

**Regulatory Compliance Information for CAS Polypropylene**
Allergens
The material used to manufacture this product does not contain any allergens - defined by the FDA as Milk, Eggs, Fish, Crustaceans, Wheat, Soy, Peanuts, or Tree nuts.
Animal Derived Content
There are no known sources of Animal Derived Content in the raw materials used to manufacture this product.
Bisphenol A
This product does ot contain any 4,4'-Bisphenol A (BPA), CAS # 80-05-7.
CONEG/Heavy Metals
This product meets the CONEG limitation of 100ppm for the total incidental context of cadmium, chromium, lead, or mercury. The quantity of these heavy metals is below the limits given in Annex II (Note) of the Decision 2002/525/EC of June 27th
Epoxy Derivatives
The material used to manufacture this product does not contain 2,2-bis(4-hydroxyphenyl)propane bis (2,3-epoxypropyl) ether (BADGE), bis(hydroxyphenyl)methane bis(2,3-epoxypropyl) ethers (BFDGE) or novolac glycidyl ethers (NOGE).
European Directive 2003/11/EC
This product conforms to the European Directive 2003/11/EC of February 2003 amending 76/769/EEC of 27 July 1076. No Polychlorinated Biphenyls (PCB), Polychlorinated Terphenyls (PCT), Octobromo-diphenyl ethers (OctaBDE), or Decabromo-diphenyl ethers (Deca-BDE) was used in the manufacturing of this product
Latex
This product does not contain any Latex. There are no known sources of Latex in the raw materials used to manufacture this product.
Ozone Depleting Chemicals (ODC's)
No Class I or Class II ODC's listed in Resolution 1005/2009/EX were used in the manufacture or formation of this product.
Phthalates
This product does not include the intentional addition of any phthalate plasticizers, including Benzyl Butyl Phthalate (BBP), CAS #85-68-7, Dibutyl Phthalate (DBP), CAS #84-74-2, or Di(2-ethylhexyl) Phthalate (DEHP), CAS #117-81-8. However, the manufacturer of the polypropylene resin used in this product reports that levels of up to 5 ppm phthalates may occur as residuals from the catalyst system used to manufacture this polymer.
Revised RoHS Directive 2011/65/EU
The chemical composition of the polypropylene material used in the manufacturing of this product is compliant with the Revised RoHS Directive, 2011/65/EU. This material contains less than 0.1% of lead (Pb) or lead compounds, mercury (Hg) or mercury compounds, hexacalent chromium compounds (Cr⁺⁶), and polybrominated biphenyl (PBB) flame retardants or polybrominated diphenyl ether (PBDE) flame retardants; and additionally contains less than 0.01% cadmium (Cd) or cadmium compounds.
REACH SVHC
This product does not contain any of the 163 chemicals held to be Substances of Very High Concern (SVHC's) as defined by the European REACH Program. Incidental amounts of any of these chemicals occuring as impurities, if present, would be below the 0.1% threshold.
SHELF LIFE
While the shelf life of products manufactured with thermoplastic composites is considered to be indefinite if stored in stable environments, the shelf-life of our products can be extended by storing the products at room temperature, out of sunlight, and in a dry environment. If you have any shelf-life or storage related questions, please contact us.

**Chemical and Environmental Resistance of Thermoplastics**
Base Resin	Weak Acids	Strong Acids	Weak Alkalis	Strong Alkalis	Organic Solvants	Alcohols	Hydro Carbons	Fuels	Gamma Rad.	UV Rad.
Polypropylene	E	G	E	E	P	G	F	F	P	F
E - Excellent G - Good F - Fair P - Poor

Statcons 4011-CAS Two Piece Black ESD Conductive Plastic Containers

Statcons SC4011-CAS Two Piece Black ESD Conductive Plastic Container 50/Box

$249.550

Buy

Statcons 4012-BAS Two Piece ESD Static Dissipative Plastic Container

Statcons SC4012-BAS Static Dissipative ESD Plastic Container 50/Box

$314.350

Buy

Statcons 4012 Two Piece Thick Wall Plastic Container (Non ESD Properties)

Statcons SC4012 Two Piece Plastic Containers (Non ESD Properties) 400/Box

$427.200

Buy

Statcons 4013-CAS Two Piece Black ESD Conductive Plastic Containers

Statcons SC4013-CAS Two Piece Black ESD Conductive Plastic Container 50/Box

$439.300

Buy

Statcons SC4012-CAS Two Piece Black ESD Conductive Plastic Container 50/Box

Price

Quantity Pricing

Customers Also Viewed

Browse Similar Items